How to Install CyberPanel on VPS in 5 Minutes in 2026

Installing CyberPanel on a VPS is one of the fastest ways to manage websites, domains, databases, email accounts, and SSL certificates from a single dashboard while taking advantage of OpenLiteSpeed for better website performance.

Many beginners find CyberPanel installation confusing because of Linux commands, server requirements, and configuration options. Following the correct installation process helps avoid errors and ensures your control panel works properly from the beginning.

This guide explains how to install CyberPanel on a VPS in 5 minutes using the official installation method, configure the essential settings, access the admin dashboard, and verify everything is running successfully.

---

What You’ll Need Before Installing CyberPanel

Before running the CyberPanel installer, make sure your VPS meets the recommended requirements. Preparing your server in advance helps the installation complete without interruptions and reduces the chances of compatibility or configuration issues later.

Minimum VPS Requirements

CyberPanel works on most modern VPS plans, but choosing the right resources ensures better performance, especially if you plan to host multiple websites.

Requirement	Recommended
RAM	Minimum 2 GB (4 GB or more recommended)
CPU	2 vCPU or higher
Storage	At least 20 GB SSD or NVMe SSD
Network	Public IPv4 Address
Access	Root user or a user with sudo privileges

Note: Although CyberPanel may install on some 1 GB RAM servers, at least 2 GB RAM is recommended for a smoother installation and stable performance, especially when using OpenLiteSpeed, MariaDB, and other bundled services.

Supported Operating Systems

CyberPanel officially supports several Linux distributions. Using a supported operating system ensures you receive updates, security patches, and the best compatibility with the latest CyberPanel releases.

Supported operating systems include:

Before starting the installation, verify your operating system by running:

cat /etc/os-release

or

hostnamectl

If your VPS is running an unsupported or outdated operating system, consider reinstalling it with one of the supported versions before proceeding.

Required Server Access

You’ll need administrative access to install CyberPanel because the installer modifies system packages, installs services, configures the web server, and updates firewall rules automatically.

Before continuing, make sure you have:

To connect to your VPS, you’ll use SSH with a command similar to:

ssh root@your_server_ip

Replace your_server_ip with your VPS’s actual public IP address.

Recommended Hardware Specifications

If you plan to host business websites, WordPress installations, or multiple domains, allocating additional server resources will improve overall performance and provide room for future growth.

A practical production configuration includes:

Spending a few minutes verifying these requirements before installation helps avoid unexpected errors and creates a stable foundation for the remaining setup process.

---

Step 1: Connect to Your VPS Using SSH

The first step is to connect to your VPS using SSH (Secure Shell). SSH creates a secure, encrypted connection between your local computer and the remote server, allowing you to install software, manage files, and configure your VPS safely from the command line.

Most VPS providers send your server IP address, root username, and password (or SSH key details) immediately after the VPS is created. Keep these credentials ready before proceeding.

Log in to Your VPS

Open the terminal on Linux or macOS. If you’re using Windows, you can use Windows Terminal, PowerShell, or an SSH client like PuTTY.

Connect to your VPS by running:

ssh root@your_server_ip

Example:

ssh root@203.0.113.10

Replace your_server_ip with your VPS’s public IP address.

If this is your first time connecting to the server, you’ll see a security prompt similar to:

The authenticity of host ‘203.0.113.10’ can’t be established.

Are you sure you want to continue connecting (yes/no)?

Type:

yes

and press Enter.

Next, enter your server password when prompted. If your VPS uses SSH key authentication, the login process will complete automatically without asking for a password.

After a successful login, you’ll see a prompt similar to:

root@ubuntu:~#

or

root@almalinux:~#

This confirms that you’re successfully connected to your VPS and ready to begin the CyberPanel installation.

Verify Your Operating System

Before installing CyberPanel, confirm that your server is running a supported operating system. This helps prevent compatibility issues during installation.

Run one of the following commands:

cat /etc/os-release

or

hostnamectl

For example, on Ubuntu 24.04 LTS, you’ll see output similar to:

NAME="Ubuntu"
VERSION="24.04 LTS (Noble Numbat)"

If you’re using Ubuntu 22.04 LTS, Ubuntu 24.04 LTS, AlmaLinux 8, or AlmaLinux 9, you can continue with the installation.

Update the Server Packages

Updating your server ensures that the latest security patches, bug fixes, and package versions are installed before CyberPanel adds its required software.

For Ubuntu, run:

apt update && apt upgrade -y

For AlmaLinux, run:

dnf update -y

The update process may take a few minutes, depending on your server and internet connection.

Once the update finishes, it’s recommended to reboot the VPS if the system installs a new kernel.

For Ubuntu:

reboot

For AlmaLinux:

reboot

After the VPS restarts, reconnect using SSH:

ssh root@your_server_ip

Your VPS is now fully updated and ready for the CyberPanel installation.

---

Step 2: Download the Official CyberPanel Installer

With your VPS updated and ready, the next step is to download the official CyberPanel installation script. This script automatically installs CyberPanel along with the required components, including OpenLiteSpeed, MariaDB, PHP, PowerDNS, and other services needed to manage your server efficiently.

Using the official installer is the safest approach because it downloads the latest stable packages directly from CyberPanel’s repositories and configures them correctly for your operating system.

Install Required Packages

Before downloading the installer, install a few essential utilities that the installation process relies on.

On Ubuntu

Run the following command:

apt install curl wget sudo -y

On AlmaLinux

Run:

dnf install curl wget sudo -y

These packages are used to:

After the installation completes, verify that curl is available by running:

curl --version

If the command displays the installed version, your server is ready for the next step.

Download the Latest CyberPanel Installation Script

CyberPanel provides an official installation script that automatically installs the latest stable version of the control panel and configures all required services.

Download and start the installer by running:

sh <(curl https://cyberpanel.net/install.sh || wget -O - https://cyberpanel.net/install.sh)

This command performs two tasks:

If curl is unavailable, the command automatically switches to wget, so the installation can continue without any manual changes.

Important: Always download CyberPanel using its official installation script. Avoid third party installation scripts, as they may contain outdated packages or unsupported modifications that can cause installation or security issues.

Once the installer starts successfully, you’ll see a menu asking you to choose the installation type and server configuration.

We’ll configure those options in the next step.

---

Step 3: Install CyberPanel on Your VPS

After launching the official installation script, CyberPanel displays a series of setup options. Choosing the correct configuration ensures the control panel, web server, database, and supporting services are installed properly. Most users can complete this step within a few minutes by selecting the recommended options.

Run the Installation Script

If you haven’t already started the installer, run:

sh <(curl https://cyberpanel.net/install.sh || wget -O - https://cyberpanel.net/install.sh)

After a few moments, the installer loads and presents the main installation menu.

Choose the Installation Type

The installer first asks which type of installation you want to perform.

Example:

CyberPanel Installer
1. Install CyberPanel
2. Exit

Please enter the number:

Type:

1

and press Enter to begin the installation.

Select OpenLiteSpeed or LiteSpeed Enterprise

Next, you’ll choose the web server.

For most users, the installer displays options similar to:

1. Install CyberPanel with OpenLiteSpeed

2. Install CyberPanel with LiteSpeed Enterprise

OpenLiteSpeed (Recommended)

Choose OpenLiteSpeed if you want:

Simply enter:

1

LiteSpeed Enterprise

Choose LiteSpeed Enterprise only if you already own a valid LiteSpeed Enterprise license or plan to purchase one.

For most VPS users, bloggers, developers, agencies, and small businesses, OpenLiteSpeed is the recommended option.

Configure the Required Installation Options

The installer will now ask a few additional questions. In most cases, the default or recommended choices work perfectly.

Typical prompts include:

Install Full CyberPanel

Select:

Y

This installs all essential components, including:

Install Remote MySQL (Optional)

If asked:

Install Remote MySQL?

Choose:

N

unless you’re connecting to a separate database server.

Install Memcached

Select:

Y

Memcached improves application performance by storing frequently accessed data in memory.

Install Redis

Select:

Y

Redis is widely used for:

Set Administrator Password

The installer may ask whether you’d like to generate a random administrator password or create your own.

Choosing your own password is generally recommended.

Example:

Do you want to set your own admin password?

Y

Then enter a strong password containing:

Using a secure password helps protect your server from unauthorized access.

Wait for the Installation to Complete

After confirming the installation options, CyberPanel automatically downloads and installs all required packages.

Depending on your VPS specifications and internet connection, this process usually takes 5 to 15 minutes.

During installation, you’ll see various services being configured, including:

Avoid closing the SSH session or restarting the VPS while the installation is running.

When the installation finishes successfully, you’ll see a confirmation message similar to:

CyberPanel Successfully Installed

Visit:

https://your_server_ip:8090
Username: admin
Password: ********

Make a note of the login URL, username, and administrator password, as you’ll use them to access the CyberPanel dashboard in the next step.

---

Step 4: Access the CyberPanel Dashboard

Once the installation is complete, the next step is to access the CyberPanel web interface. This dashboard allows you to manage websites, domains, databases, email accounts, SSL certificates, DNS records, backups, and server settings without using the command line.

Find Your CyberPanel Login URL

After a successful installation, the installer displays the login details in the terminal.

You’ll see information similar to:

CyberPanel Successfully Installed

Visit:

https://your_server_ip:8090
Username: admin
Password: your_password

Replace your_server_ip with your VPS’s public IP address.

For example:

https://203.0.113.10:8090

Open the URL in your preferred web browser.

Note: CyberPanel uses port 8090 by default. If the login page doesn’t load, make sure this port isn’t blocked by your server firewall or cloud firewall.

Log in to the CyberPanel Admin Panel

When the login page appears, enter the administrator credentials created during installation.

• Username: admin
• Password: Your administrator password

Click Sign In to access the dashboard.

On your first login, you should see the CyberPanel home screen with sections such as:

This confirms that CyberPanel has been installed successfully and is communicating correctly with the underlying server services.

Change the Default Administrator Password

If you used the automatically generated administrator password during installation, it’s a good idea to replace it with a strong password that only you know.

To change your password:

1. Click Users from the left sidebar.
2. Select Modify Users.
3. Choose the admin account.
4. Enter a new strong password.
5. Save the changes.

A secure administrator password should include:

Avoid using common words, predictable patterns, or passwords you’ve used elsewhere.

Verify Dashboard Access

Before moving to the next step, spend a minute confirming that the dashboard is working correctly.

Check that you can:

If everything loads normally, your CyberPanel installation is complete and ready for server configuration and website hosting.

---

Step 5: Verify That Everything Is Working Properly

Before hosting your first website, it’s important to verify that CyberPanel and its core services are running correctly. A quick health check ensures your control panel is ready for production and helps identify configuration issues before they affect your websites.

Check CyberPanel Services

The CyberPanel service should start automatically after installation. You can verify its status by running:

systemctl status lscpd

If the service is running correctly, you’ll see output similar to:

Active: active (running)

If the service isn’t running, restart it using:

systemctl restart lscpd

Then check its status again.

Verify OpenLiteSpeed Status

CyberPanel uses OpenLiteSpeed as its default web server. Make sure it’s running properly before hosting any websites.

Run:

systemctl status lsws

A healthy service displays:

Active: active (running)

If needed, restart OpenLiteSpeed:

systemctl restart lsws

To confirm the web server is listening on the required ports, run:

ss -tulnp | grep lshttpd

This verifies that OpenLiteSpeed is ready to serve web traffic.

Confirm MariaDB and PowerDNS Are Running

CyberPanel installs MariaDB for database management and PowerDNS for DNS services. Verify both services are active.

Check MariaDB

systemctl status mariadb

If necessary, restart it:

systemctl restart mariadb

Check PowerDNS

systemctl status pdns

If the service isn’t running, restart it:

systemctl restart pdns

Both services should display:

Active: active (running)

Test the Web Panel in Your Browser

Finally, open your browser and visit:

https://your_server_ip:8090

After logging in, verify that:

You can also verify that OpenLiteSpeed is serving its default page by opening:

http://your_server_ip

If you see the default OpenLiteSpeed welcome page, it confirms that the web server is functioning correctly and ready to host websites.

Once these checks are complete, your CyberPanel installation is fully operational, and you can begin creating websites and managing your server with confidence.

---

How to Create Your First Website in CyberPanel

With CyberPanel installed and all core services running correctly, you’re ready to host your first website. CyberPanel provides a simple interface for creating websites, managing domains, enabling SSL certificates, and configuring hosting settings without editing server configuration files manually.

Add a New Website

Start by logging in to your CyberPanel dashboard.

From the left navigation menu, go to:

Websites → Create Website

You’ll be asked to provide a few details for your new website.

Package

Choose the hosting package for the website.

If this is your first website, select:

Default

Select Owner

Choose the website owner.

For most single user servers, select:

admin

Enter Your Domain Name

Type the fully qualified domain name you want to host.

For example:

example.com

or

blog.example.com

Make sure the domain already points to your VPS using the correct DNS records before launching the website publicly.

Choose the PHP Version

CyberPanel supports multiple PHP versions.

For new websites, choose one of the latest stable versions supported by your application, such as:

Using a modern PHP version improves security and overall performance.

Additional Options

Depending on your requirements, you can enable:

These settings can also be configured later if needed.

After reviewing the information, click Create Website.

Within a few seconds, CyberPanel creates:

A success message confirms that your website has been created.

Configure Your Domain Name

Before visitors can access your website, your domain must point to the VPS.

Update your domain’s DNS records with your domain registrar.

Create an A Record similar to:

Type	Host	Value
A	@	Your VPS Public IP

If you want the www version to work, create another record:

Type	Host	Value
A	www	Your VPS Public IP

DNS propagation usually takes anywhere from a few minutes to 24 hours, depending on your DNS provider.

You can verify the DNS configuration using tools like:

Once the domain resolves to your VPS IP, you’re ready to enable HTTPS.

Enable a Free SSL Certificate

CyberPanel integrates with Let’s Encrypt, making it easy to secure your website with a free SSL certificate.

To enable SSL:

1. Open Websites → List Websites.
2. Click Manage next to your domain.
3. Select Issue SSL.
4. Click Issue SSL again to begin the process.

CyberPanel will automatically:

If the process completes successfully, you’ll receive a confirmation message.

Important: Your domain must already point to your VPS before requesting an SSL certificate. Otherwise, domain validation will fail.

Verify the Website Loads Successfully

After creating the website and enabling SSL, test everything in your browser.

Visit: https://yourdomain.com

Confirm that:

If the site doesn’t open, check:

Completing these checks confirms that your first website is hosted successfully on CyberPanel and is ready for content deployment.

---

How to Install WordPress in CyberPanel

One of CyberPanel’s most useful features is its built in WordPress installer. Instead of manually creating databases, uploading files, and configuring WordPress, you can deploy a new website in just a few clicks. This saves time and reduces the chances of configuration errors, especially for beginners.

Install WordPress with One Click

Log in to your CyberPanel dashboard.

From the left sidebar, navigate to:

Websites → List Websites

Locate the website where you want to install WordPress and click Manage.

Scroll down to the Application Installer section and select:

WordPress + LSCache

The LiteSpeed Cache version is recommended because it integrates directly with OpenLiteSpeed, helping improve website speed and overall performance.

Next, provide the required information.

Website Path

In most cases, leave the default path unchanged:

public_html

If you want to install WordPress inside a subdirectory, specify the folder name instead.

Database Name

Enter a unique database name or use the automatically generated one provided by CyberPanel.

For example:

wordpress_db

Database Username

Create a database username that WordPress will use to connect to MariaDB.

Example:

wp_user

Database Password

Choose a strong password containing uppercase letters, lowercase letters, numbers, and special characters.

Using a secure password helps protect your website from unauthorized database access.

Site Information

Complete the remaining fields, including:

Review the details carefully, then click Install Now.

CyberPanel will automatically:

Depending on your VPS performance, the installation usually finishes within one or two minutes.

Complete the Initial WordPress Setup

After the installation is complete, open your website in a browser: https://yourdomain.com

You should see your newly installed WordPress website.

To access the administration panel, visit: https://yourdomain.com/wp-admin

Enter the administrator username and password you created during installation.

Once logged in, it’s a good idea to complete a few basic tasks before publishing your website.

Recommended first steps include:

Keeping your installation clean improves security and reduces unnecessary resource usage.

Log in to the WordPress Dashboard

After signing in, verify that your WordPress installation is functioning correctly.

Check that you can:

Finally, visit the front end of your website and confirm that:

If all these checks are successful, your WordPress website is fully installed and ready for customization, content creation, and public access.

---

Common CyberPanel Installation Errors and Fixes

Even if you follow the installation steps carefully, you may encounter a few issues during or after the setup. Most CyberPanel installation problems are caused by incorrect server configuration, insufficient resources, firewall restrictions, or missing system dependencies. Fortunately, these issues are usually straightforward to identify and resolve.

Below are some of the most common CyberPanel installation errors along with their causes and practical solutions.

CyberPanel Installation Failed

Sometimes the installer stops unexpectedly or exits before completing the installation.

Possible Causes

How to Fix It

First, make sure your VPS meets the recommended requirements.

Verify your operating system:

cat /etc/os-release

Check available memory:

free -h

Check available disk space:

df -h

If everything looks correct, update your server and run the official installation script again.

Installer Gets Stuck During Installation

The installer may appear to freeze while downloading packages or configuring services.

Possible Causes

How to Fix It

Wait a few minutes before assuming the installation has stopped.

If there is no progress for an extended period:

Avoid closing the SSH session while the installation is running.

Unable to Access Port 8090

After installation, the CyberPanel login page may not open.

Example:

https://your_server_ip:8090

Possible Causes

How to Fix It

Check whether the CyberPanel service is active:

systemctl status lscpd

If it isn’t running, restart it:

systemctl restart lscpd

Also verify that port 8090 is allowed in:

SSL Certificate Issues

Sometimes Let’s Encrypt cannot issue an SSL certificate.

Possible Causes

How to Fix It

Confirm that your domain resolves to the correct VPS IP.

You can verify this using:

dig yourdomain.com

or

nslookup yourdomain.com

Once DNS propagation is complete, try issuing the SSL certificate again from the CyberPanel dashboard.

OpenLiteSpeed Service Not Starting

If OpenLiteSpeed fails to start, your websites won’t load.

Possible Causes

How to Fix It

Check the service status:

systemctl status lsws

Restart the service:

systemctl restart lsws

If the issue persists, review the OpenLiteSpeed error log to identify the exact cause before making configuration changes.

MariaDB Connection Errors

Your websites may fail to connect to the database if MariaDB isn’t running correctly.

Possible Causes

How to Fix It

Verify the service status:

systemctl status mariadb

Restart MariaDB:

systemctl restart mariadb

If the service starts successfully, verify that your website is using the correct database name, username, and password.

DNS Resolution Problems

A website may not open even though CyberPanel is installed correctly.

Possible Causes

How to Fix It

Check that your domain points to your VPS’s public IP address.

You can verify DNS propagation using:

dig yourdomain.com

or an online DNS propagation checker.

If you recently changed your DNS records, allow enough time for propagation before troubleshooting further.

Firewall Blocking CyberPanel

Firewall rules can prevent access to the CyberPanel dashboard or hosted websites.

How to Fix It

On Ubuntu systems using UFW, verify the firewall status:

ufw status

Allow the required ports if they’re blocked:

ufw allow 80/tcp
ufw allow 443/tcp
ufw allow 8090/tcp

Reload the firewall:

ufw reload

If you’re using firewalld on AlmaLinux, make sure the same ports are permitted there as well.

How to Troubleshoot CyberPanel Problems Efficiently

When troubleshooting, avoid changing multiple settings at the same time. Instead, verify each component individually.

A practical troubleshooting sequence is:

1. Confirm your VPS is online.
2. Verify the operating system is supported.
3. Check that CyberPanel services are running.
4. Verify OpenLiteSpeed status.
5. Confirm MariaDB is active.
6. Check firewall rules.
7. Verify DNS records.
8. Confirm the domain resolves correctly.
9. Review system logs for specific error messages.

Following this step by step approach makes it much easier to locate the root cause and resolve installation issues without unnecessary trial and error.

---

CyberPanel Security Best Practices After Installation

Installing CyberPanel is only the first step. Keeping your VPS secure is equally important to protect your websites, databases, and sensitive information. A few simple security practices can significantly reduce the risk of unauthorized access, malware, and server related issues while ensuring your hosting environment remains stable over time.

Update CyberPanel Regularly

CyberPanel developers frequently release updates that include security patches, bug fixes, and performance improvements. Running the latest stable version helps keep your server protected against known vulnerabilities.

To update CyberPanel, log in to the dashboard and navigate to:

Server → Upgrade

Follow the on screen instructions to install available updates.

Before performing any major update, it’s always a good idea to create a complete server backup.

Change Default Credentials

If you used the default administrator account during installation, make sure you secure it with a strong password.

A secure administrator password should:

Avoid sharing your administrator credentials with multiple users. Instead, create separate user accounts with appropriate permissions whenever possible.

Enable Automatic Backups

Unexpected problems such as accidental file deletion, failed updates, or hardware issues can occur at any time. Regular backups make recovery much easier.

CyberPanel includes a built in backup manager that lets you schedule automatic backups for:

Whenever possible, store backups on a remote location rather than on the same VPS.

Configure the Firewall

A properly configured firewall helps block unwanted traffic while allowing legitimate users to access your server.

At a minimum, allow only the ports required for normal operation, including:

Close any unused ports to reduce your server’s attack surface.

Secure SSH Access

Since SSH provides full administrative access to your VPS, protecting it should be a priority.

Some recommended practices include:

These measures make unauthorized access significantly more difficult.

Enable Two Factor Authentication (If Available)

If your CyberPanel version supports two factor authentication (2FA), enable it for administrator accounts.

With 2FA enabled, logging in requires:

This additional layer of security helps protect your server even if your password is compromised.

Keep Your Server Updated

CyberPanel depends on the underlying operating system and installed packages. Regularly updating your server ensures you receive the latest security fixes and stability improvements.

On Ubuntu, update your server using:

apt update && apt upgrade -y

On AlmaLinux:

dnf update -y

If a kernel update is installed, reboot the VPS during a planned maintenance window to apply the changes.

Monitor Server Resources

Keeping an eye on server performance helps you identify potential issues before they affect your websites.

Review resource usage regularly, including:

If your VPS consistently runs close to its resource limits, consider upgrading your hosting plan to maintain reliable performance.

Use HTTPS for Every Website

Always issue an SSL certificate for every domain hosted on your server. HTTPS encrypts data transmitted between visitors and your website while improving trust and browser compatibility.

CyberPanel integrates with Let’s Encrypt, making it easy to install and renew free SSL certificates directly from the dashboard.

Remove Unused Applications and Accounts

Over time, you may create test websites, unused databases, or temporary user accounts. Removing anything you no longer need helps keep your server organized and reduces potential security risks.

Perform periodic reviews to:

A well maintained server is generally easier to manage, more secure, and less likely to encounter unexpected issues.

Following these best practices helps create a more secure and reliable CyberPanel environment, making it easier to manage websites while reducing the likelihood of future security or performance problems.

---

Why Use CyberPanel Instead of cPanel?

Both CyberPanel and cPanel are popular web hosting control panels, but they differ in pricing, web server technology, resource usage, and licensing. While cPanel has been an industry standard for many years, CyberPanel has gained popularity because it offers a modern interface, OpenLiteSpeed integration, and many premium features without licensing costs.

If you’re launching personal projects, WordPress websites, business sites, or managing multiple domains on a VPS, understanding these differences will help you choose the control panel that best fits your requirements.

Feature	CyberPanel	cPanel
License	Free (OpenLiteSpeed Edition)	Paid License Required
Web Server	OpenLiteSpeed	Apache (LiteSpeed requires an additional license)
Performance	Excellent, especially for WordPress	Very Good
Resource Usage	Lightweight	Higher than CyberPanel
One Click WordPress	Yes	Yes
Free SSL	Yes (Let’s Encrypt)	Yes
Built in LiteSpeed Cache	Yes	Requires LiteSpeed Web Server License
Docker Support	Available	Limited
File Manager	Yes	Yes
Email Management	Yes	Yes
DNS Management	Yes	Yes
Database Management	MariaDB/MySQL	MySQL/MariaDB
Automatic Backups	Yes	Yes
Multi Domain Hosting	Yes	Yes
Beginner Friendly	Yes	Yes

When Should You Choose CyberPanel?

CyberPanel is an excellent choice if you:

Its combination of speed, simplicity, and cost effectiveness makes it a strong option for bloggers, developers, freelancers, agencies, and small businesses.

When Should You Choose cPanel?

cPanel may be a better option if you:

Although cPanel is feature rich and widely supported, it requires an active license, which increases hosting costs compared to CyberPanel.

Which One Is Better?

For most VPS users, CyberPanel offers better overall value. It combines a modern interface with OpenLiteSpeed, free SSL certificates, website management, email hosting, DNS management, and WordPress support without requiring a paid license.

If your priority is performance, lower operating costs, and straightforward VPS management, CyberPanel is a practical choice. On the other hand, if your workflow depends on the cPanel ecosystem or you’re managing environments where cPanel is already standardized, it remains a reliable option.

Both control panels are capable of hosting production websites, so the right choice ultimately depends on your budget, technical requirements, and preferred server management experience.

---

CyberPanel Installation Checklist

Before you start hosting live websites, take a few minutes to verify that every important part of your CyberPanel installation is working correctly. Completing this checklist helps ensure your server is secure, stable, and ready for production use.

Use the following checklist as a final verification before deploying your websites.

Checklist Item	Status
VPS is running a supported operating system	☐
Server packages have been updated successfully	☐
CyberPanel installation completed without errors	☐
CyberPanel dashboard is accessible on port 8090	☐
Administrator password has been changed	☐
OpenLiteSpeed service is running	☐
MariaDB service is active	☐
PowerDNS service is working properly	☐
Firewall allows ports 22, 80, 443, and 8090	☐
Domain points to the correct VPS IP address	☐
Website has been created successfully	☐
Free Let’s Encrypt SSL certificate is installed	☐
HTTPS is working correctly	☐
WordPress installation (if required) completed successfully	☐
Website loads without errors	☐
Automatic backups are configured	☐
Server updates have been verified	☐

Final Verification

Before considering the installation complete, perform these quick checks:

If every item in this checklist is complete, your CyberPanel server is fully configured and ready to host websites securely and reliably.

---

Conclusion

Installing CyberPanel on a VPS is a straightforward process when you follow the correct steps and prepare your server properly. From connecting to your VPS and running the official installation script to configuring your first website, enabling SSL, and installing WordPress, each step helps create a reliable hosting environment that’s ready for real world use. CyberPanel’s intuitive interface, OpenLiteSpeed integration, and built in website management tools make it a practical choice for both beginners and experienced server administrators.

Once your installation is complete, remember that maintaining your server is just as important as setting it up. Keep CyberPanel and your operating system updated, monitor server performance, create regular backups, and follow basic security practices to keep your websites running smoothly. With a properly configured CyberPanel VPS, you’ll have a solid foundation for hosting fast, secure, and scalable websites.

---

FAQs